facebook Modifiers in Medical Coding: 2026 List, Examples & Rules

Modifiers in Medical Coding: The 2026 Guide With Examples and Payer Rules

Modifiers in medical coding provide additional context to CPT and HCPCS codes, ensuring accurate reimbursement and compliance
Read Time: 15 minutes
May 25, 2024

Technically Reviewed By:

Kristen Cote Last Updated: November 6, 2026

Kristen is a Senior Account Manager with 25 years of experience in the healthcare industry. She specializes in commercial insurance resolution, helping practices navigate payer disputes, denials, audits, and other revenue challenges.

What are modifiers in medical coding?

Modifiers in medical coding are two-character codes appended to CPT or HCPCS Level II codes that tell the payer a service was altered by a specific circumstance without changing the code’s definition. They explain same-day visits, bilateral or repeat procedures, split professional and technical work, and distinct services, and many of them change how much a claim pays in 2026.

  • Payment impact: Pricing modifiers such as -26, TC, -50, and -51 change the allowed amount, while informational modifiers such as LT and RT clarify where or how the service happened.
  • Biggest audit risk: Modifier 25 and modifier 59, including its XE, XS, XP, and XU subsets, draw the most payer scrutiny because they unlock payment for services that would otherwise bundle.
  • Payer rules vary: Medicare, Medicaid, and commercial plans format the same modifier differently, especially for bilateral and multiple procedures, so the payer’s policy decides the claim format.

Table of Contents

Which modifier guide do you need?

How Modifiers Work on a Claim

When we take over billing for a new practice, the CPT code review almost always surfaces modifier problems before anything else. The codes are usually right. The two characters after them are where the money goes missing.

Modifiers come from two sets. CPT modifiers, maintained by the American Medical Association, are numeric: 24, 25, 26, 50, 51, 57, 59, 76, 77, and 91. HCPCS Level II modifiers, maintained by CMS, are alphabetic or alphanumeric: TC, LT, RT, and the four X modifiers (XE, XS, XP, XU). Both sets report in the same place, item 24D of the CMS-1500 or the matching segment of the 837P electronic claim, which holds up to four modifiers per service line.

Payers sort modifiers into two working groups. Pricing modifiers change the allowed amount: -26 and TC split a code’s value, -50 pays a bilateral procedure at a set percentage, and -51 triggers a multiple procedure reduction. Informational, or payment-eligible, modifiers do not change the fee directly but determine whether a line pays at all. Modifiers 24, 25, 57, and 59 fall here, because they tell the payer that a service normally bundled into another one is separately payable this time.

Sequencing matters when a line carries more than one modifier. The convention most payers follow is pricing modifiers first, payment-eligible modifiers second, and anatomic modifiers last. A radiologist reading a right knee X-ray reports 73560-26-RT, not 73560-RT-26. Many claim scrubbers will reject the second version, and some payers will price the line as global.

The final rule of thumb: a modifier never repairs missing documentation. Every modifier is a claim that something in the record is true, and payers increasingly ask to see the record before they pay.

What is the difference between modifier 24 and modifier 25?

Modifier 25 reports a significant, separately identifiable E/M service on the same day as a procedure or other service. Modifier 24 reports an unrelated E/M service by the same physician during a surgery’s postoperative period. Both modifiers go on the E/M code, never on the procedure code, and both need documentation that stands on its own.

Modifier 25 example and payer rules

An established family medicine patient comes in for uncontrolled hypertension. The physician adjusts medications, reviews labs, and documents a full assessment. During the visit the patient mentions knee pain, and the physician performs a joint injection. The claim reports 20610 for the injection and 99213-25 for the visit, with the hypertension diagnosis pointed to the E/M line and the knee osteoarthritis diagnosis pointed to 20610.

Under Medicare’s global surgery rules, the evaluation that leads to a minor procedure is already paid inside that procedure, so the E/M must address a problem beyond the decision to inject. A different diagnosis is not strictly required, but a separate problem documented in its own assessment is what survives review. Since 2025, Medicare also pays add-on code G2211 with a modifier 25 visit only when the same-day service is an annual wellness visit, a vaccine administration, or another Part B preventive service. Commercial payers are stricter: Cigna has announced, then delayed, a requirement for office notes on every 99212 to 99215 claim billed with modifier 25 and a minor procedure, first proposed in 2022.

Modifier 24 example and payer rules

Three weeks after a knee arthroscopy (29881, a 90-day global), the same orthopedic surgeon sees the patient for a wrist sprain from a fall. The visit reports 99213-24 with the wrist sprain diagnosis. If the diagnosis on the visit relates to the knee surgery, Medicare treats it as postoperative care and denies it. For the full breakdown, see our guide to how to use modifier 24 and modifier 25.

What is the difference between modifier 26 and TC?

Modifier 26 bills only the professional component of a service: the physician’s interpretation and report. Modifier TC bills only the technical component: the equipment, supplies, and staff that produce the image or test. When one entity performs both parts, it bills the code globally with no modifier, and only codes with a CMS PC/TC indicator of 1 can be split.

The split follows ownership. A radiologist reading a two-view chest X-ray (71046) for a hospital outpatient bills 71046-26, and the hospital collects the technical portion on its own facility claim. A freestanding imaging center that owns the equipment and contracts an outside reader bills 71046-TC, while the reading radiologist bills 71046-26. A practice that owns its machine and employs the radiologist bills 71046 with no modifier.

The same logic shows up in pathology, where a pathologist interpreting a hospital specimen bills 88305-26, and in radiation oncology. One query this page already receives is “CPT 77387 with modifier 26,” which comes up when a radiation oncologist provides the guidance interpretation in a hospital department that owns the delivery equipment. The physician reports the professional component only, because the facility captures the technical work.

The two most expensive errors we correct are billing globally when a hospital owned the equipment, which creates an overpayment the practice must refund, and appending TC on a physician claim for a service performed in a facility, which simply denies. Specialty detail lives in our radiology modifiers guide and our pathology CPT codes and modifiers for 2026.

When do you use modifier 57?

Modifier 57 goes on an E/M service provided the day before or the day of a major surgery, meaning a procedure with a 90-day global period, when that visit produced the decision to operate. Without it, Medicare bundles the visit into the surgical package. For minor procedures with 0-day or 10-day globals, modifier 25 applies instead.

Example: a general surgeon is called to the emergency department, evaluates a patient with acute appendicitis, admits the patient, and performs a laparoscopic appendectomy (44970) that night. The surgeon reports the initial hospital visit with modifier 57 and reports 44970 separately. A routine preoperative visit the day before a surgery that was already scheduled is not a decision for surgery and is not separately payable.

Modifier 57 belongs to a family of global surgery modifiers. Choosing the wrong member is one of the most frequent denial reasons on surgical claims:

SituationGlobal period involvedModifier
E/M that results in the decision for surgery, day before or day of90-day (major)57
Separate E/M problem on the same day as a minor procedure0-day or 10-day (minor)25
Unrelated E/M by the same physician during the postoperative period10-day or 90-day24
Staged, planned, or more extensive related procedure during the postoperative period10-day or 90-day58
Unplanned return to the operating room for a related problem10-day or 90-day78
Unrelated procedure during the postoperative period10-day or 90-day79

Before choosing any of these, check the global days listed for the procedure in the Medicare Physician Fee Schedule. The global period, not the visit type, decides the modifier.

Modifier 50 vs. LT and RT for Bilateral Procedures

Modifier 50 reports a procedure performed on both sides of the body at the same session. Medicare only accepts it on codes with a bilateral surgery indicator of 1 in the fee schedule, and pays the line at 150 percent of the single-side amount. Codes with an indicator of 2 are already bilateral by definition, so modifier 50 should not be added. Indicator 3 codes pay each side at 100 percent and are reported with RT and LT.

LT and RT are HCPCS anatomic modifiers. They do not change payment by themselves, but many payers require them on any unilateral procedure involving paired anatomy, and they are the only way to show a payer that two identical codes are not duplicates. Podiatry and ophthalmology carry their own anatomic sets too: TA through T9 for toes, FA through F9 for fingers, and E1 through E4 for eyelids.

The trap is that each payer wants bilateral services formatted differently. Using bilateral knee injections (20610) as the example:

Payer typeClaim formatTypical payment
MedicareOne line: 20610-50, 1 unit, charge doubled150% of the single-side allowed amount
Many Medicaid and commercial plansTwo lines: 20610-RT and 20610-LT, 1 unit each100% first side, 50% second side
Some commercial plansOne line: 20610-50, 2 units150% after the payer’s reduction

If the single-side allowed amount is $70, Medicare pays $105 for the bilateral service. Send the commercial two-line format to Medicare and the second line usually denies as a duplicate, leaving $35 on the table until someone reworks the claim. Our podiatry modifiers guide and ophthalmology modifiers guide cover the anatomic sets in more depth.

Modifier 51 and Multiple Procedure Payment

Modifier 51 identifies additional procedures performed by the same provider at the same session. It exists to trigger the multiple procedure payment reduction. For codes with a Medicare multiple procedure indicator of 2, the highest valued procedure pays at 100 percent and each additional procedure, through the fifth, pays at 50 percent. Procedures beyond the fifth are priced by report with documentation.

Three rules govern correct use. First, list the procedure with the highest relative value first, with no modifier, and append 51 to the rest in descending order. Second, never add 51 to add-on codes (marked with a plus sign in CPT) or to codes listed as modifier 51 exempt in CPT Appendix E. Third, check the payer: many Medicare contractors apply the reduction automatically and do not require 51, while many commercial plans still expect it on the claim.

Here is what sequencing is worth on a single encounter. Two procedures carry allowed amounts of $820 and $410. Reported correctly, the claim pays $820 plus 50 percent of $410, or $1,025. Reported with the lower-value code first, a payer that reduces the second listed line pays $410 plus 50 percent of $820, or $820. That is $205 lost on one claim. A surgical practice with 15 multi-procedure encounters a month leaves about $3,075 a month, or roughly $36,900 a year, on the table from line order alone. Those figures are illustrative, but the pattern is one we find regularly when a new client’s history is reviewed.

Endoscopy has its own variation. Multiple scopes in the same family follow special endoscopy pricing rather than the standard 50 percent cut, which our gastroenterology CPT codes and modifiers guide walks through.

Modifier 59 vs. XE, XS, XP, and XU

Modifier 59 marks a distinct procedural service: two services that the National Correct Coding Initiative (NCCI) normally treats as one, performed under circumstances that make both payable. It only works on code pairs whose NCCI modifier indicator is 1. A pair with an indicator of 0 cannot be unbundled with any modifier.

Because 59 was so broadly used, CMS introduced four more specific HCPCS subsets effective January 1, 2015, and its guidance is to use 59 only when no X modifier describes the situation better. A 2005 Office of Inspector General review found that 40 percent of code pairs billed with modifier 59 did not meet program requirements, and modifier 59 has remained a standing audit target since.

ModifierMeaningExample
XESeparate encounter on the same dayA wound repair in the morning and an unrelated procedure at an afternoon visit
XSSeparate structure or organExcision of a lesion on the arm and a biopsy of a separate lesion on the back
XPSeparate practitionerA service performed by a different practitioner than the one reporting the bundled code
XUUnusual non-overlapping serviceA service that does not overlap the usual components of the main procedure

Never report 59 and an X modifier on the same line. Medicare accepts both, and many commercial plans accept X modifiers, but some still recognize only 59, so the payer policy decides which one goes on the claim.

One pattern we see constantly in new-client account reviews is 59 appended by habit to anything that hits an edit, without anyone checking whether the services were truly distinct. That works until a payer audits, and then it gets recouped across every claim in the lookback period. We would rather catch the edit before the claim leaves.

Our weekly Friday deliverables flag modifier and documentation questions before claims go out, and every claim is submitted within 48 business hours of receiving charges. Want to know which modifiers are costing your practice? Start with a no-cost account analysis.

Book a Free Consultation

Repeat Procedure Modifiers: 76, 77, and 91

Three modifiers tell a payer that a second identical line on the same date is not a duplicate. Picking the right one depends on who repeated the service and what kind of service it was.

Modifier 76 reports a procedure or service repeated by the same physician on the same day. A patient receives a chest X-ray (71045) before chest tube placement and another after it to confirm position. The first line reports 71045 and the second reports 71045-76.

Modifier 77 reports the same repeat when a different physician performs it. If one cardiologist interprets a morning ECG and a partner interprets a second tracing that afternoon, the second interpretation reports 93010-77.

Modifier 91 applies only to clinical laboratory tests repeated on the same day to obtain subsequent results. Serial troponins drawn at set intervals to rule out a heart attack report as 84484, then 84484-91 for each later draw, with collection times in the record. Modifier 91 does not apply when a test is rerun because of equipment malfunction, a specimen problem, or to confirm an initial result. It also does not apply to codes that already describe a series, such as glucose tolerance testing (82951 and 82952).

The most common mix-up is 76 on a lab test or 91 on an imaging study. Labs take 91. Procedures and imaging take 76 or 77. Neither belongs on an E/M visit. Payers also differ on format: some want a separate line for each repeat with the modifier, while others prefer one line with units, subject to the medically unlikely edit (MUE) limit for the code. When a repeat is denied as a duplicate, the fix is almost always the modifier and the documented times, not an appeal.

CPT Modifiers List 2026: Quick Reference

This table pulls every modifier in this guide into one place, along with what it does to payment and the error that most often gets it denied. Keep it next to the payer policies for your top five payers, because the definitions are national but the formatting rules are not.

ModifierMeaningPayment effectCommon denial trigger
24Unrelated E/M during postoperative periodAllows a separate visit feeDiagnosis linked to the surgery
25Separate E/M same day as a procedureAllows a separate visit feeNo distinct problem documented
26Professional component onlyPays the interpretation portionCode has no PC/TC split
TCTechnical component onlyPays the equipment and staff portionBilled by a physician for facility-owned equipment
50Bilateral procedureTypically 150% on MedicareWrong format for the payer
51Multiple proceduresAdditional procedures at 50%Appended to add-on or exempt codes
57Decision for major surgeryAllows the pre-op E/M feeUsed with a minor procedure
59Distinct procedural serviceUnbundles an NCCI pairNCCI modifier indicator of 0
XE, XS, XP, XUSpecific distinct service subsetsUnbundles an NCCI pairReported alongside 59
76 / 77Repeat by same / different physicianPays the repeat lineMissing times or used on labs
91Repeat clinical lab testPays the repeat resultRerun for error or confirmation
LT / RTLeft side / right sideInformationalMissing on paired anatomy

For a specialty view of the same codes, our family practice modifiers guide and urology CPT codes and modifiers for 2026 map these modifiers to the procedures each specialty bills most.

How do you prevent modifier denials?

You prevent modifier denials by checking three things before a claim leaves: the global period on the procedure, the NCCI edit and modifier indicator for each code pair, and the payer’s own formatting rules. Then the documentation has to support every modifier on its own, because payers review the record, not the claim.

The workflow we build into every account follows six steps:

  1. Verify the NCCI modifier indicator before appending 59 or any X modifier.
  2. Check the global period on every procedure before choosing 24, 25, 57, 58, 78, or 79.
  3. Point each diagnosis to the service line its modifier supports.
  4. Confirm the payer’s bilateral format before billing 50, RT, or LT.
  5. Sequence pricing modifiers first and anatomic modifiers last on every line.
  6. Audit modifier frequency each quarter against payer policy and the latest NCCI release.

Software helps but does not decide. Most practice management systems and EMR software include a claim scrubber that catches NCCI pairs and missing anatomic modifiers. What a scrubber cannot do is read the note and tell you whether a modifier 25 visit was actually separate. That judgment is where our account teams spend their time, and it is the reason the weekly Friday report to each practice includes clarification requests on documentation rather than silent corrections.

Submitting electronically also shortens the loop. A rejected 837P comes back in days, while a paper claim with a modifier error can sit for weeks before anyone knows. Our breakdown of electronic vs. paper claims covers the timing difference.

2026 Changes That Affect Modifier Billing

The CMS CY 2026 Physician Fee Schedule final rule, effective January 1, 2026, set two conversion factors for the first time: $33.4009 for most clinicians and $33.5675 for qualifying participants in advanced alternative payment models. Both are higher than 2025. The same rule also finalized a 2.5 percent efficiency adjustment that reduces work RVUs and intraservice time for non-time-based services.

That adjustment matters for modifiers because of where it lands. Time-based codes such as E/M visits, services on the Medicare telehealth list, maternity codes with an MMM global period, and new codes for 2026 are exempt. Procedures and imaging are not. Those are exactly the codes that carry 26 and TC splits, bilateral 150 percent pricing, and 50 percent multiple procedure reductions. A sequencing or bilateral error in 2026 cuts into a line that is already worth a little less.

NCCI procedure-to-procedure edits and MUE limits also update every quarter, in January, April, July, and October. A modifier that cleared an edit last quarter can hit a new one this quarter, which is why quarterly audits belong in the workflow.

On the commercial side, modifier 25 remains the most contested modifier in payer policy. Cigna’s on-again, off-again plan to require office notes with every 99212 to 99215 claim billed with modifier 25 and a minor procedure shows how quickly a payer can turn a routine modifier into a documentation event.

Across the more than 30 specialties we bill, the practices that handle these changes well are the ones with someone assigned to read payer bulletins. If that person does not exist in-house, our medical recruiting services can help place certified coding staff, or our team can take the work on directly.

Next Steps

Modifier accuracy is a process problem, not a memorization problem. Pick the path that matches where your practice is losing money today.

Frequently Asked Questions

How many modifiers can you add to one CPT code?

The CMS-1500 form and the 837P electronic claim each hold up to four modifiers per service line. If a service genuinely needs more, modifier 99 signals multiple modifiers, with the rest listed in the claim notes. Most payers process the first modifiers in sequence, so pricing modifiers should come first.

Does modifier 25 go on the E/M code or the procedure code?

Modifier 25 always goes on the E/M code, never on the procedure. It tells the payer the visit was significant and separately identifiable from the procedure performed that day. Appending it to the procedure code is a formatting error that typically causes the E/M line to deny as bundled.

Can you bill modifier 59 and XS on the same line?

No. CMS guidance is to report either modifier 59 or the more specific X modifier, never both on the same line. Use the X modifier when it describes the situation, such as XS for a separate anatomic site, and reserve 59 for payers that do not recognize X modifiers.

Does Medicare require modifier 51?

Many Medicare contractors identify multiple procedures automatically and apply the 50 percent reduction without modifier 51, so the modifier is often optional on Medicare claims. Many commercial and Medicaid plans still require it. List the highest valued procedure first either way, because line order affects which procedure takes the reduction.

Should I use modifier 50 or RT and LT for Medicare?

For codes with a bilateral surgery indicator of 1, Medicare wants one line with modifier 50 and one unit, paid at 150 percent. Many commercial and Medicaid plans instead want two lines with RT and LT. Billing the wrong format usually denies one side as a duplicate.

What is the difference between modifier 76 and modifier 91?

Modifier 76 reports a procedure or imaging service repeated by the same physician on the same day. Modifier 91 reports a repeated clinical laboratory test performed to obtain new results, such as serial troponins. Modifier 91 does not apply to reruns caused by equipment or specimen problems.

Can a missing modifier be fixed after a claim is denied?

Yes. Commercial payers usually accept a corrected claim, submitted with frequency code 7 and the original claim number. Medicare typically handles a missing or wrong modifier as a reopening for a clerical error rather than a formal appeal. Either route works best when the documentation already supports the modifier.

Do all modifiers change reimbursement?

No. Pricing modifiers such as 26, TC, 50, and 51 change the allowed amount directly. Payment-eligible modifiers such as 24, 25, 57, and 59 decide whether a bundled service pays at all. Informational modifiers such as LT and RT clarify the service without changing the fee.

How often should a practice audit its modifier usage?

Quarterly is a practical minimum, because NCCI edits and MUE limits update in January, April, July, and October. An audit should compare modifier 25 and 59 frequency against peers, sample the documentation behind them, and confirm each top payer’s bilateral and multiple procedure formats.

Stop losing revenue to modifier denials. Quest National Services has billed for more than 30 specialties since 2008, with a Florida-based account manager and a no-cost account analysis to find what your claims are missing.

Book a Free Consultation

For informational purposes only.